Finn light 3000

      No Comments on Finn light 3000


3000 lumens in a perfectly machined package allows for cord free operation. One hour of light for one unforgettable dive. Half power (1500 lumens) still outclasses most canister lights and provides two hours of usage. 300 lumen mode provides a bright light that is safe to use on the surface. Enjoy the freedom of the cordless “SHORT” light.

Finn Light 3000


  • 3 high efficiency LED Cree XM-L
  • luminous flux 3000 lm
  • 10° focus beam
  • optimized beam for effective signaling
  • 3 modes of operation – 3000 lm / 1500 lm / 300 lm
  • Li-Ion accumulator
  • running time – 1 h on full power (3000 lm), 2 h in 1500 lm, 12 h in 300 lm
  • discharging and overcharging protection
  • resistant aluminium alloy body
  • borosilicate glass
  • anatomic Goodman handle
  • operational depth up to -200 m (655 ft)
  • weight on surface 760 g (28 oz) – including handle
  • weight under water 255 g (10 oz)


Source of light
There are  three powered LED diodes Cree XM-L providing 3000 lm used in FINN LIGHT 3000 series. They shine with cold white light 6300 K and guarantee 10 000 hours of permanent usage. Exceptionally effective optics concentrates the light in 10° angle and gives the optimized shape of beam! The spot of light allows the effective signalization to your dive partner.


There is a proved, tried and tested electronics inside. The user can choose the mode of operation for his dive: full performance 3000 lm with running time 1 hour, 1500 lm for 2 hours or the safety mode 300 lm. In the safety mode it is possible to use the lamp on the surface (for preparing of gear or in dry caves for instance) and it shines up to 12 hours. The lamp is being manipulated with the improved magnetic ring on head. The first turn of the magnetic ring in any direction switches the light on 300 lumens mode. Another turn in clockwise direction swiches the light into the stronger mode (1500 lumens). You’ll get full power after third turn in the clockwise direction. Turning counter clockwise will lead to the reverse procedure
With the overheating protection the electronics protects the lamp against the damage and the user against the consequence of the accidental switch on out of the water.

Li-Ion technology
Li-Ion batteries are ideal source of energy for the LED. The electronics protects the batteries against the discharging and the clever charger against the overcharging. The batteries has no memory effect that means you can leave them on the charger during the night. Li-Ion batteries provides enough capacity for the long running time keeping the lamp small sized and lightweight.

Material and construction
The new head construction makes the switching easier. No more searching for the small button in the dark. The magnetic ring stops in accurately defined positions when changing the light modes. Cooling ribs on head create the unique look of FL 3000 series. The perfectly machined accumulator case and deliberate details come up to the superior design of this light. When using the light you feel safely as with the serious gun in the darkness.
With aluminium alloy covered with the hard eloxal coating the lamp is intended for the use in extreme conditions.

Safety first
FINN LIGHT lamps comply with qualifications of European Standards and possess all important CE Certificates.


Available at Scubadive West

call 095 43922

[email protected]



Leave a Reply